I've been working on a small series of art prints with astronauts as the subject. Here's the latest one. It's actually really similar to the other process thread I posted. Enjoy.
I started off with a few rough sketches.
Here is the completed drawing on my light table.
Transparency and color separations on the light table:
After this step, I coat the screens and let them dry. Below is a shot of the first one being exposed with a 500 watt halogen.
Wash out > dry > sleep.
Then I get my registration tabs in place and tape off the first screen.
Here is the first color.
Second color, split fountain: red violet to light yellow (the red violet is slightly metallic)
Test print for the final color:
Then it was reclaiming time. I've still got to trim the prints down and sign them. Now that I'm looking at it, I probably should have done a fourth screen... maybe some light blue shadows or something on the figure.
Now I'm off to buy groceries!