Hello all! I was recently gifted several packs of Bab's 13x18" waterproof inkjet film. I tested them last night, though, and the ink isn't sticking to the film. I'm Epson 1400 that has a non-OEM continuous ink system in place rather than traditional ink cartridges.
I put the "rough" side in correctly and tried printing on the "ultra premium photo glossy" and "ultra premium presentation matte" settings both to similar results. I assume that the problem is the ink from the C.O.S. system but I wanted to see if anyone has had this issue before I go out and by more epson cartridges. Thanks!