PROCESS - the $60 washout booth

[ferg2001]

what you need
1. some 2x4s


2. some showerboard


3. some glue


4. ..also some screws, caulk, a sink drain, some plexi or a fluorescent light cover-(this is what I used), 1 or more fluorescent shop lights, beer.

[ferg2001]

make these first


then build the frame

[Nicholas Wilson]

moooore, looking awesome.

[Jeph]

does it matter what kind of beer?

[ferg2001]

it should look sortof like this


then flip the frame upside down glue on the bottom


use some weights or clamps



should look like this

[ferg2001]

then cut a hole for the backlight windowz


then glue the plexi or fluorescent light cover thing in place. the light cover shit was like 5 bucks..plexi would have been around $20



then glue the back in place

[ferg2001]

then install the sides..dont worry about gaps..silicone caulk will fix that shit


then jerryrig some backlight action. 3 lights would rule..i only have one.


view from front

[ferg2001]

then install the drain and caulk everything like a motherfucker. the back window got more 'caulk play' than shown here


then i guess you are done.

[ferg2001]

does it matter what kind of beer?

cold

[Barry Obama]

caulk play.....

I personally would paint the wood with a couple of coats of primer and cement driveway paint. keep it from swelling up and sponging out when it gets wet.