PrintingPlans.com - 4-color press

[Angryblue]

anyone have experience with this setup? a friend of mine is going to put one of these together and i thought i'd see if you had any experience with this setup or suggestions.

http://printingplans.com

[squeegeethree]

That'll work but those screens are way to high up in the air for my taste. Cut that degree in half.

[Angryblue]

that does seem like it would be a bit much.

[Josh Rickun]

i'd be afraid to use a flash dryer on that set up and warp the shit outta everything in no time

[squeegeethree]

I'd build one of these first to work my way up to that...

[ialieneye]

Ha! I was just looking at this to buy/build for my studio. I think as a starting place it's not bad as long as it hold registration. For less that $400 wood cut and included, you could do a lot worse and looks like it's fit a small space

[Work Of The Devil]

you can easily find a good used press for $400-$800. That thing would work but looks like a real pain in the ass.

[mile44]

you can easily find a good used press for $400-$800. That thing would work but looks like a real pain in the ass.

this.


You can get a brand new 'Silver Press' for $400

[Josh Rickun]

i have a silver press and it sucks mega dongs. i mean, it works but you gotta do maintenance on it before and a lot of times during every job to make sure you don't screw urrthang up.

[mile44]

i have a silver press and it sucks mega dongs. i mean, it works but you gotta do maintenance on it before and a lot of times during every job to make sure you don't screw urrthang up.

sunova ... really?
I have a single color and love it, but I'm not all hip to the multi-color tshirt world yet.


-D-