Problem with screen sticking briefly to poster paper, leaving a mark
I am new to screen printing my posters. Still trying to get a hang of it.
I am printing an 18 x 24 poster. At the top is a large colored area.
My problem is the screen briefly sticks to the paper. It releases after a half second, but it leaves a kind of halo mark where the screen was kissing the paper for too long. It looks like S_ _ t.
Tension of squeegie against screen
Speed of squeegie
consistency of ink
tension of screen
size of screen wich is rather large, 47 x 55.
This is a second coat of ink on the paper through the screen. I didn't like the way it went down the first time, so am going over it. Not sure if the original coat (which is totally dry. It had been sitting for over a month) is making a surface that is aggrivating this situation.
TW Graphics waterbased ink (not flat ink, just normal)
I have an old Filbar semi automatic press, with a vaccum table which I mask off with taped down sheets of paper on the area that my poster does not cover.
Is there a common cause for the quick sticking of a screen down on sticky wet ink? I did a quick search of the forum but didn't see an answer.
Thanks for your help,