- ...those second-hand screen cleaning blues
- Tabletop surface problem/question...
- Pre-cut paper, inconsistent size, registration hell
- has anyone ever printed on dry erase board?
- Resource for DIY set ups
- The Music Poster
- Lightbox/exposure design and tube spacing
- See my new shop! Aaaah! Pictures! (and unrestrained bragging)
- My press, and the switch from fabric to paper.
- Alternate way to produce film positives.
- If there's anyone out there who doesn't already have Andy's book
- Good sites to buy used equipment
- Wanting to print larger posters...
- Vacuum lid vs compression lid w/ foam
- Tom W. Benton
- How to explain trapping...
- Keeping film-emulsion contact with baby oil
- Best roll transparancy film for HP designjet 800ps
- Home-built Exposure Unit and Washout for sale- Austin Area
- Need Suggetion
- building Screen printing head
- Murakami stencil longevity?
- Colex Offers Automatic Finishing Solutions For Wide Format Printers
- Accurate color matching?
- Drying Rack in the Bay Area
- Vellums v. Plastic Films? Thoughts?
- Extra drying rack- unbelievable deal- Austin area.
- Help with separating this drawing
- Vinyl vs. Emulsion...
- Should I buy this Eclipse press?
- Tunnel Dryer in the U.K ?
- Screen Printing Posters ?
- Multi-colour Print ?
- Washing out ?
- Heatset dyes?
- Inconsistent screen exposure
- Drying Racks in Boston Area?
- American Daytona 30X40 Press Question
- Size of exposure unit.
- Paper Cutters- who's got one, and what do you suggest?
- Commemorative Print Process / Black Swan - Serie Project
- Newbie printer...thin line of emulsion after exposure and cleaning/reclaiming...
- Looking to buy a ATMA AT-800H/E Model AT-800H/E, 2000
- question for one arm users
- Introduction - Tance Hughes
- Moving up in the world!
- Showoff your studio/printing set up
- Drying rack help.
- Needed- Print Drying Racks- Austin area
- Good paper for double sided printing?
- CMYK printing question
- Remove grey into the alpha channels?
- New TMI Site
- Anyone know where to pick up pre-stretched Murakami screens?
- Screen printer in DC area needed
- Anyone try one of these squeegees?
- which ink should i use
- Nazdar 2700 water based on pressure sensitive vinyl
- paper recommendations? cougar 100 cardstock or the other kind
- Buy or make a hand vacuum press?
- Looking for a paper cutter.
- Source for paper sticker label sheets?
- bernie franklestein
- Cats and screens.
- your paper recomendations
- NazDar 9700 on Matte cardstock - catalyst needed?
- TW on pre-gessoed canvas. WTF?
- Hair-like ink stains on prints
- When printing without a vacuum table...
- Serigraphy Classes- Los Angeles
- Advice on TW ink
- newbie with questions about ink for pressure-sensitive vinyl
- Kick legs...
- Aluminum screen leaking water...yay!
- 8000W lights
- Stumptown like place in MN?
- Monarch semi automatic printing woes
- Charlotte NC printers - Screen Burn
- Exposure issue/loss of detail problem
- Larger film transparencies (12"x12") for LP Jackets - where?
- Another home made table with Squeegee arm (Picture heavy)
- exposing woes....image distorted on screen
- Problems with exposing times.
- Manoukian ZERO-IN Speedcure blue with the Sun?
- Super Opaque Films
- Crazy light waves in Exposure unit w/image
- Printing Large Without A Table
- Best emulsion...
- Ulano QLT vs Lawson SBQ 501
- Alternatives to Speedball's Diazo Photo Emulsion Remover?
- Very Long Exposure Time
- Spike UDC 420D Emulsion - Partial Mix
- My One-Arm Bandit DIY build! (many pics)
- Chicago area drying rack and frames for sale.
- New, need help w/ Cincy One Arm press
- Alternative to Positives on transparencies?
- Guy Burwell x 112 Printworks process
- Squeegeeville Screenprinting Course in Houston Nov 12&13 2011
- Oil paint printing adventures
- Ulano Proclaim exposure time
- projet transparency...
- Converting lightbox to exposure unit (w/images) question
- Meter for consistant exposure
- Thin border around acetate after burning.
- will this work??
- How do I get this off my screen? (w/image)
- In the process of building a Hobbyist/ProAm screen printing shop need some advice :D
- Split Fountain w/Metallics
- who else besides French Paper
- Sticker Printing
- Hinge Clamps From Diesel Fuel
- Looking for poster screenprinter on east coast. phila? bklyn?
- At my wits end trying to burn a screen
- Can I Use Fabric Ink on Canvas? What About Heat Setting?
- Looking for Screen Printer in Souther CA. Any Recs?
- 4 Color Process- Order of overprinting
- Large format screenprinting?
- Painting a background on pizza boxes.
- Registration - Hairline Precision
- editioning ? - switching colors
- Bitmap help
- Painting on Denim (for band banner)
- Screen Building / Mesh adhesive.
- Amergraph Advantage 150
- best over-printing colors...?
- How to make a Vacuum Table for a 4 color press
- Looking for printer in DC/MD area....
- HELP! Having trouble w/ blending
- First poster attempt - index separation 6 color print
- the mysterious 3rd colour
- Lawson Geniette XL in Western MA
- one arm squeegee holder
- Screenprinting with oil pain
- Glass for exposure units available!
- My lil' ol studio
- building an exposure unit
- Poly plus pot life
- Screen Printing How-To, Popular Mecanics 1944
- Printing on burlap?
- Acid Blotters
- Ulano QTX
- Block out for water based inks?
- Homemade screen printer
- Printing on pizza boxes precedently die-cutted
- CMYK printing
- Printing on canvas..Fabric or Actylic Inks?
- emulsion issues...
- Epson 1280 Printers
- printing flatstock with tshirt press (all colors at once)
- table height
- chicago info
- Is there a good high density ink for Epson R 1900?
- Gettin' that paper nice and flat
- WB inks on Drink Koozies?
- Stupid mistake....Reclaim or not?
- Printing Article
- Why Xpedx?
- Potentially stupid coating question
- t-shirt sexy time
- Screwball Press 20th Anniversary
- I'd appreciate some advice on an equipment purchase...
- Jiffy clamps crapping out....
- Rubylith help in San Diego???
- Can a 196 t/inch mesh hold a 75PPI dither dot?
- Advice on how I should print this...
- Smelly Shop, Neighbor complaining
- Printing on stretched canvas
- Emulsion for Paper and texile printing
- Pinhole Problems!
- Anyone used these adjustable hinge clamps?
- poster press
- Manual Vacuum Press in Seattle for sale
- In Search of Thick Paper
- Where to buy sheets of rubylith in San Francisco
- Photopolymer emulsion for water based inks
- Switchin' to Murakami Photocure PRO
- Opaque Ink
- Exposure Unit Pump
- Ideal Settings for an Epson 3800?
- Who makes holographic foil paper?
- Murakami Photocure TXR/400W MH/Oiled paper positives
- Printing on deckled stock
- Best table top t-shirt press?
- Lower mesh count require less burn time?
- Seeking advice from non-sales persons
- Sawtooth problem that I can't figure out.
- semi-auto's - cameo, saturn, etc? help me and post your preference
- Screenprinting over spray stencil
- ink issues when overprinting with tw inks
- Need a manuel for a Sharp SF-2216 BW copier
- Korn's Liquid Tusche
- New Charles Darwin Screenprint
- summer screenprinting courses
- Emulsion remover
- Building my own setup
- Issues with my Ranar exposure unit (also photos of hot bitches with pretty mouths!!)
- my first tea bagging... err... tea staining
- Difference between Speedball Transparent Base and Extender
- hivesmoker print
- need ink suggestions
- D-Haze
- WB Textile Ink
- cylyndrical printing machine, anybody?
- Washout Problem: Side Runs
- Trying to find an outlet timer
- Printing over silver ink—FML
- Anybody screen printed over offset posters?
- Conveyor Dryer for sale
- Need Screen Printer to Print Posters in CA, WA, OR, AZ or NV
- Need a UK printer for some SRA2 positives, now.
- Printing on Handmade Cotton Paper
- Paper Absorbency Questions
- screen burning - lining up your transparency?
- How many pulls do you do?
- let's talk trapping..
- A couple of questions from a novice..
- Emulsion problems
- HELP! mass bleeding on posters.
- Emulsion for water-based
- San Diego Printshop Auction
- Ink options for canvas? Need air dry, opaque, slow dry
- Moire on film . . .
- Screen Splitting
- EnviroHaze Stain Remover?
- New bucket of black ink is way to fast
- Crazy Heavy Paper Help
- How to attach positive to a long screen?
- How did Warhol print?
- Old Squeegee
- mesh count
- Opaque ink staying tacky on posters..HELP
- edge of darkness
- Epson 3000 repair in Chicago
- Should I trim off the registration marks or leave them?
- Thick Vinyl paper?
- lawson geniette for sale
- Vaccum table size...did i screw myself?
- Video: printing at Lure
- Printer recommendations??
- Preferred Water Based Graphic Ink?
- Anyone use Fixxons film positives?
- Remote, On-Site Printing
- Cincinnati One Arm Squeegee
- identifying screen mesh count
- Hand screened/painted art prints: Tesla, Earhart, Magellan, Columbus
- Anyone familiar with the big old manual Challenge cutters or similar?
- Screenprinter's in Toronto: semi auto press for sale
- Scoop coater caps
- printing metal
- looking for a semi auto press?
- Question about registration tabs
- Printing with Iron Oxide Powder?
- banding on high detail stochastic epson 3000 output
- Multiple emulsion coatings?
- exposure woes
- Chipboard from Uline?
- Anyone need Nazdar 5500 Ink?
- Emulsion thicker in the centre of screen...
- double pull: bad form?
- printing blues
- lacquer thinners
- Anyone tried mixing PC pigments and speedball acrylic ink?
- Screen printing on vinyl LPs
- Discountscreenfilms.com ... anyone dealt with them?
- New toy arrives tomorrow(plotter)
- Trials & tribulations of home made exposure unit
- Drying Racks for Sale in Texas
- how the hell do you post a picture to a thread
- Large Format Transparencies... Success!
- Another speculative and overly ambitious attempt at screen printing.
- Transparency with House Paint? Tips?
- Auto-Optimize for the AmerGraph Advantage 150
- Half-tone Troubles...
- push or pull stroke
- Nazdar 9500
- Anyone ever hear of these inks?
- What are the cover -up "jackets" women wear over something sleeveless called ?
- Can I touch up a film positive with a sharpie?
- vac table improvements
- Scoop coater method - sharp or dull?
- Trouble with printing halftones (w/image)
- Vinyl for stickers?
- screen printing record covers...
- Save 50% on monofilament polyester mesh
- Spot color vs. Layered printing.
- Anyone near SF that can screen on cardboard boxes?
- emulsion blistering
- NuArc light tables
- Exposure times
- water based glossy clear varnish
- Printing this kind of detail possible?
- What is the best ink to use for fabric screenprinting?
- vacuum bag exposure technique
- I'm looking for good mesh at a reasonable price...
- Printing on Foil
- Discharge inks on Black Shirts
- mesh count jargon
- Lancer Plastex series ink for poster printing, ever used it? vs TW water based
- cleaning screen frames
- Need help figuring out lights for exposure unit
- Ryonet washout booth help
- rubylith and chris farley skits
- beginner blues first post
- Emulsion exposure problems
- Screen Printing on Tyvek?
- Washing out problems / Troubleshooting.
- 100# cover in royal/true blue?
- Exposure problem with home built exposure unit
- Hanging prints on clothesline
- Creation of a studio
- Poster Printing Workshop, Austin TX, Mar 12&13
- Scoop Coating a 23 X 31
- Anyone know some good screenprinting shops in Canada?
- Large transparency film
- Screen Printing with Grain Effect on the Ink
- Screen Printing Magazine - or other publications
- water-based gloss
- cleaning solvent inks
- new printing invention!
- Paper from Paper Source?
- Screen Stretching Glue/Adhesive
- Adventures in DIY Screen Printing blog
- tapeing stencil
- Search for Screen Printing Supplies (Poland, Germany, Lithuania), Eastern Europe!
- two questions about printing on Leather
- where's the best source for printer inks and film
- T-shirt screens in Austin... Re-stretched?
- Large Film Positives: Nashville & Beyond
- Newbie: can water based inks be used on paper?
- speedball...print ink over ink
- All the sudden I can't get my screens to burn correctly.
- Artist run open studio. setup info?
- Bleeding, Bubbling and Streaking Ink...
- stubborn dots of emulsion
- Exposure Glass Repair...
- What's yer emulsion of choice? Why?
- Adding Micro Adjustments to Press?
- After coating, can see through mesh still?
- Emulsion Supplier UK
- Can I apply screenprinting ink on T shirt directly with a brush?
- Looking for larger washout booth
- looking for nazdar 5900 enamel ink tips
- Discharge inks-avilable in europe?
- That there's a BIG unit...
- Texturing Techniques
- placing stencil
- Screen Printing Portfolio?
- Dammit.
- Poly-Lite Exposure Unit...
- scratched emulsion
- Suppliers in Midwest/Michigan?
- Hey AndyMac, or those who has built a vacuum topped exposure unit
- Help speking out an 'art print' job to achieve thick layers of ink...
- New squeegee blades...
- Leaky roof + me being lazy = water in plastisol ink
- Crackhead press needs a drying rack...
- Finally printing but having issues with solvent inks
- washing out
- Help! Looking for a light exposure testing file?
- Dried ink on mesh
- How to make most durable screen? (stencil) whatever stupid noob question
- 1st CMYK experiment / sticker shock
- Need unusual water cleanup medium
- NY t-shirt printer needed:
- exposure times with the sun
- Coated / unburned creen / how long?
- What is the best ink to use for fabric screenprinting?
- Studio Equipment for Sale - Epson 7600, Drying Rack, Screens, etc.
- 'Ghost' on the screen
- Screen printing 4 colour process on styrene with a single color machine?
- Simple mesh stretching method
- Ratio of retarder thinner to ink.
- Can You Mix Your Ink and Retarder Brands?
- off contact
- Krazy man needs help...
- Need Exposure Time/Calculator Help
- using new emulsion
- Duplexing/Laminating
- biggest donkey move ever! help!?
- TW inks in europe ?? /or alternative ?
- M&R Eclipse II Semi-Auto Info???
- marla printing beds
- NooB Stupid / Lazy / Drunk & Pissed
- Frozen Emulsion
- vinyl stencils
- Ink won't flash cure fast enough
- Ink for Lacquered Wood
- Looking for supplies
- exposure build question.
- rice paper print on to surfboard - who knows about this?
- Know any one who can fix a Fibar semi auto press?
- Anyone in Portland/Seattle/Vancouver want a...
- car paints
- preparing-artwork-for-screen-printing-in-adobe-illustrator
- One armed bandit - Help please !
- Emulsion & Ink On Airplane
- stretching newman roller frames
- help!! ...anyone got any ideas whats happening here?
- Shirt printer in the Tri-state area
- In this cold weather, how long do you think it will take for Autosol 7000 to dry
- Alternative to lacquer thinner for screen cleanup?
- What is making this weird line appear? Is the ink cracking?
- wet on wet
- Decal printing ink
- RhinoScreen Dry Stencil Film / screen printing made easy
- Special caulk for sealing inside corners of screens.
- DIY screen streching question
- patches?! we don't need no stinking patches!!
- basement setup questions...
- Help! Waterbased ink not fixing to glossy record cover
- anyone use stainless steel mesh?
- Is cold weather bad for water based inks ?
- drying rack
- Identify a mesh count with the Moire effect.
- Help! Problem printing record covers
- Help identifying screen "kickstand."
- Wash out issue
- Transparencies
- Filbar press for sale in Seattle
- 400w High Pressure Sodium Vapor fixtures
- Toy-safe (/FDA-approved) water-based ink for weird kids rock-themed toys
- Which extender base
- Repairing tiny pinholes in screen
- Tip to remove thin emulsion film blockage?
- Starting to get angry at NAZ-DAR's new kilo conversion.
- Drying Rack for sale, Rochester, NY - $150
- Want to Buy Used Manual Press 4' x 8' or larger
- Mesh keeps ripping
- Ideal paper weight 350gsm vs. 270gsm (go metric!)
- Cleaning Your Vacuum Top
- Position of the flash unit and of the printer on a carousel
- screen printing onto posters
- Lawson Express Jet New Digital Screen Printing Equipment Now Available
- Switching from Halogen to Metal Halide
- Oof.. My shop is a mess.
- introduction
- New Post / Poster
- Pulling question
- Notes on Creating Films for Screenprinting
- Printing Beer Labels....
- Winterizing Noobian Style
- best deal on ink for screen printing posters-question from a humble noob
- Squeegeeville Screenprinting Course in Kingston, Ont. Dec. 4&5
- Kick it up a notch with this exposure unit
- Drying Rack - Portland
- CMYK on Silver Ink
- Screen printing paper, UK
- Question for the sticker printer folks on here...
- new t shirt prints
- Vellum/Film/Printer thoughts...
- noob buying supplies
- I'm in the market to buy a Cameo press
- best way to cut down a squeegee?
- What tension should I stretch my screen? 230 51"x56"
- PrintingPlans.com - 4-color press
- ...and finally i print
- Somebody recc me a good C1S paper
- Poster Printer - small orders
- Tiling Seps for Four Color Process
- Flavor Paper
- Hix frame: how to retention
- Paper Weights
- Film Direct Ink Conversion Kit (a kit for printing black only)
- DIY screen printing
- Need help with wet spots/loss of detail
- acrylic ink and water-soluble transparent extender
- Crazy Sounding Press
- What goes haywire when emulsion grows too old?
- Emulsion in the D/FW Texas area?
- Good Quality polyester mesh requirement
- House Paints and transparency help
- recycled paper and environmentally friendly soy ink
- The More You Know
- last chance cheap presses, parts for one arm
- Free screenprinting tech guide
- Can you ID this press?
- textillions - dry cleaning resistant inks?
- Artcrank London Process...
- HELP! has anyone used nazdar 2700 clear base with speedball?
- Matsui 301 for posters?
- How important is micro registration?
- LPI, mesh count, and degrees.
- Drying System
- Printing Vinyl Record Sleeves?
- Ink problems printing stickers.
- 16 years in screenprinting newbie!!!
- TW Metallics
- Prepping an image for screen printing- help please!
- Professional printing company in new york
- 2 color poster in 10 minutes
- ink blots on film with epson 3000
- Printing on 7" plastic sleeves
- how to mail a 220g/m2 poster?
- what are the mensch coating materials ?
- please please please help me with qtx
- Squeegee Sharpening Service
- Step Tests: Where to start?!
- Another thread about wavy paper
- Mixing Fabric Ink...?
- de haze product question