Quote:
Originally Posted by zombieparty
next to the mdf at the hardware store, there should be some mdf with a melamine coating (the plastic looking white stuff) give that a shot. i use it for my platen on my fabric/tshirt setup. i have a ton of spray tack on it, and it can be cleaned off fairly easily with mineral spirits (especially if you dont let it build up like mine)
|
yup. that's what we print on at AIR.
you can get that tack crap & tape bits off super easily if you need to with a good spraying of 409 or windex and then scrape it all down with a razor, repeat until clean, no damage to the print surface.